how to hide ethernet cable along wall

DIY Cable Management: The Easy Way to Hide Ethernet Cables Along Walls”

Are you tired of seeing unsightly Ethernet cables dangling along your walls? Do you want to know how to hide them seamlessly along the wall?

Hiding Ethernet cables not only improves the aesthetics of your home or office but also protects them from damage. In this article, we’ll show you different methods to hide Ethernet cables along walls and provide tips and tricks for a flawless installation.

Whether you’re a gamer, a movie buff, or a professional who relies on a stable internet connection, you’ll want to ensure your Ethernet cables are well-hidden and protected. By the end of this article, you’ll have the knowledge and confidence to install your Ethernet cables like a pro.

Let’s dive into the tools and materials you’ll need and the different methods to hide Ethernet cables along a wall.

Hiding Ethernet cables along walls not only improves the aesthetics of your home or office but also protects them from damage. When left exposed, cables can easily be tripped over, snagged, or accidentally disconnected, leading to internet downtime or potential hazards.

Tools and materials required

Hiding Ethernet cable along a wall requires a few basic tools and materials. Here’s what you’ll need:

  1. Ethernet cable ( well, I’m not kidding here..)
  2. Cable clips or ties
  3. Raceways 
  4. Cable channels
  5. Conduit
  6. Wall plates

Having the right tools and materials is essential for a successful installation. With the right setup, you can easily hide your Ethernet cable along a wall and enjoy a clean and organized space.

Hiding Ethernet Cable Along Wall

how to hide ethernet cable along wall

Once you have prepared the area and gathered the necessary tools and materials, it’s time to start hiding your Ethernet cable along the wall. Here are some steps to follow:

Use cable clips or ties: Cable clips or ties are a simple and effective way to secure the cable along the wall. Simply place the clip or tie on the wall surface and thread the cable through it. Then, use a hammer or screwdriver to secure the clip or tie to the wall. Repeat this process every few feet along the cable path.

Use raceways: Raceways are plastic or metal channels that attach to the wall and conceal the cable. They are easy to install and come in different sizes and colors to match your wall’s decor. Simply attach the raceway to the wall using screws or adhesive and thread the cable through it.

Use cable channels: Cable channels are similar to raceways, but they have a hinged cover that allows for easy access to the cable. They are ideal for areas where you may need to access the cable frequently, such as near a router or switch. Simply attach the channel to the wall using screws or adhesive, thread the cable through it, and snap the cover closed.

Use conduit: Conduit is a flexible or rigid tube that encases the cable and protects it from damage. It is a more permanent solution that requires cutting into the wall to install. 

However, it provides the most protection for the cable and is ideal for areas where the cable may be exposed to moisture or physical damage.

Use wall plates: Wall plates are decorative covers that conceal the entry and exit points of the cable. They come in different styles and colors to match your wall’s decor. Simply attach the wall plate to the wall using screws, thread the cable through it, and snap the cover closed.

D Line Decorative Cable Trunking Cover

Get Wired: Using IGBTs for Generating Bipolar Square Waves

rlc talk

How To Hide Ethernet Cable Under Hardwood Floors?

how to hide ethernet cable along wall

Hiding an Ethernet cable under hardwood floors can be a bit challenging, but there are a few ways to do it:

Use a cable raceway: A cable raceway is an easy way to hide your cables . You can paint it to match the color of your walls, so it blends in better.

Run the cable under the carpet: If you have carpeted floors, you can tuck the Ethernet cable under the edge of the carpet, along the wall. You can use a carpet knife to make a small cut in the carpet to feed the cable through.

Drill holes: You can drill small holes in the hardwood floor to feed the cable through. Make sure to drill the holes in areas where they will not be visible. You can use a floor vent or another inconspicuous location.

Use a flat Ethernet cable: A flat Ethernet cable is much easier to hide under hardwood floors because it is thinner and more flexible than a round cable. You can run it along the baseboard or tuck it under the carpet.

Remember to always use caution when working with power tools or sharp objects. If you’re unsure about any of these methods, it’s best to hire a professional to do the job.

Easily hack for hiding internet cable (Ethernet) no cutting walls or floor

How many transistors does a NAND gate have?

rlc talk


How long can Ethernet cable be run? 

Ethernet cable can be run up to a maximum length of 100 meters (328 feet) before signal degradation occurs.

How fast is Ethernet cable? 

Ethernet cable can support different speeds, depending on the type of cable and the network equipment being used. Common speeds include 10 Mbps, 100 Mbps, 1 Gbps, and 10 Gbps.

Can you run Ethernet cable outside? 

Yes, you can run Ethernet cable outside, but you need to use cable that is designed for outdoor use and take measures to protect it from the elements.

How do you test Ethernet cable? 

You can test Ethernet cable using an Ethernet cable tester, which checks for continuity, shorts, and misfires in the cable.

Can you splice Ethernet cable? 

Splicing Ethernet cable is not recommended, as it can lead to signal loss and interference. Instead, use a coupler or junction box to connect two cables together.

How do you terminate Ethernet cable? 

Ethernet cable is terminated using RJ45 connectors, which are crimped onto the ends of the cable using a specialized tool.

Similar Posts